Abbotsford ads Abbotsford, All categories classifieds Abbotsford, All categories free ads Abbotsford, ads for sale Abbotsford, ads to buy Abbotsford, FREEADS in Canada Abbotsford Page number 4-1

Electrical parameters Ratio 600: 1 , 1000:1, 2000:1, 3000:1 (customized) Accuracy class 0.2%, 0.5%, 1% Primary current 0 - 3000A AC Secondary current 0 - 5A AC (customized) Max. Cont. Input current 3600A Load capacity ≤2.5VA or 20Ω Over voltage category CAT III 600 V Output signal (AC current) 500mA, 1A, 5A AC at nominal input current Output signal (AC voltage) 333mV, 500mV, 1V, 5V AC at nominal input current Output 2.

Ratio 1000: 1 or 2000:1 (customized) Accuracy class 0.2%, 0.5%, 1% Primary current 0 - 3000A AC Secondary current 0 - 5A AC (customized) Max. Cont. Input current 3600A Over voltage category CAT III 600V Output 2.5 meter cable with D01 connector Max. voltage not insulated conductors 720 V Standard EN.

Ratio 1000: 1 or 2000:1 (customized) Accuracy class 0.2%, 0.5%, 1% Primary current 0 - 3000A AC Secondary current 0 - 5A AC (customized) Max. Cont. Input current 3600A Over voltage category CAT III 600 V Output 2.5 meter cable with D01 connector Max. voltage not insulated conductors 720 V Standard EN.

Ratio 1000: 1 or 2000:1 (customized) Accuracy class 0.2%, 0.5%, 1% Primary current 0 - 1000A AC Secondary current 0 - 5A AC (customized) Max. Cont. Input current 1200A Load capacity ≤2.5VA or 20Ω Over voltage category CAT III 600V Output 2.5 meter cable with D01 connector.

Ratio 1000: 1 , 2000:1, 1000:5 (customized) Accuracy class 0.1%, 0.2%, 0.5% Primary current 0 - 500A AC and 0-1000A AC Signal output 1mV/A, 1mA/A Secondary voltage 0 - 0.5V AC and 0 - 1V AC; Secondary current 0-1A or 0-5A AC Max. Cont. Input current 1200A Load capacity ≤20Ω, standard 4Ω Over.

Ratio 1000: 1, 2000:1 or 2500:1 (customized) Accuracy class 0.1%, 0.2%, 0.5% Primary current 0 - 100A AC, 0 - 200A AC Secondary current 0 - 100mA AC, 0 - 200mA AC (customized) Max. Cont. Input current 240A Load capacity ≤10Ω , Standard 4Ω Over voltage category CAT III 600V.

The model Q70 oscilloscope current probe, it is suitable for 0-1000A current measurement, both cable and copper bus bar online measurement. Its core is made by Permalloy, the influence of external magnetic field is very small, which ensures the high accuracy, high stability and high reliability of uninterrupted measurement long time.

Ratio 1000: 1, 2000:1 or 2500:1 (customized) Accuracy class 0.1%, 0.2%, 0.5% Primary current 0 - 100A AC, 0 - 200A AC Secondary current 0 - 100mA AC, 0 - 200mA AC (customized) Max. Cont. Input current 240A Load capacity ≤10Ω , Standard 4Ω Over voltage category CAT III 600V.

Ratio 1000: 1 or 2000:1 (customized) Accuracy class 0.1%, 0.2%, 0.5% Primary current 0 - 1000A AC Secondary current 0-1A AC, 0 - 5A AC (customized) Max. Cont. Input current 1200A Load capacity ≤20Ω, standard 4Ω Over voltage category CAT III 600V.

Ratio 1000: 1 or 2000:1 (customized) Accuracy class 0.1%, 0.2%, 0.5% Primary current 0 - 1000A AC Secondary current 0-1A AC, 0 - 5A AC (customized) Max. Cont. Input current 1200A Load capacity ≤20Ω, standard 4Ω Over voltage category CAT III 600V.

Ratio 1000: 1 or 2000:1 (customized) Accuracy class 0.1%, 0.2%, 0.5% Primary current 0 - 500A AC Secondary current 0 - 500mA AC or 0-5V AC (customized) Max. Cont. Input current 600A Load capacity ≤10Ω, standard 4Ω Over voltage category CAT III 600V.

Ratio 1000: 1, 2000:1 or 2500:1 (customized) Accuracy class 0.1%, 0.2%, 0.5% Primary current 0 - 100A AC, 0 - 200A AC Secondary current 0 - 100mA AC, 0 - 200mA AC (customized) Max. Cont. Input current 240A Load capacity ≤10Ω , Standard 4Ω.

Ratio 1000: 1, 2000:1 or 2500:1 (customized) Accuracy class 0.1%, 0.2% Primary current 0 - 100A AC, 0 - 200A AC The model XQ20 clamp on current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars, no need to interrupt the power supply and disconnect the circuit in testing, easy to carry and especially suitable for on-site online testing.

The model XQ20 clamp on current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars, no need to interrupt the power supply and disconnect the circuit in testing, easy to carry and especially suitable for on-site online testing. It output 0-200mA or 0-100mA AC signal for measuring and analyzing system.

The model XQ20 clamp on current sensor is suitable for 200A cable online measurement, the user friendly shape make It easily clamp onto cables or bus bars, no need to interrupt the power supply and disconnect the circuit in testing, easy to carry and especially suitable for on-site online testing. It output 0-200mA or 0-100mA AC signal for measuring and analyzing system.

The model XQ13 100A current probe clamp is suitable for 0A-100A cable online measurement, it belongs to high performance transducer field. Up to 0.1% accuracy class, this current probe clamp is suitable for most oscilloscopes. Current signal can be measured directly. Suitable for accurate measurement of AC current using the permalloy core material.

The Q13 clamp on current probe is a high accuracy mini probe for measurements to 120A AC. This current clamp probe uses a special magnetic core to provide higher accuracy 0.1% and lower phase shift. It can output 1mA/A, 1mV/A or 10mV/A etc. The Q13 Series clamp current probe is an excellent probe to be used in power and low level current measurement applications.

Ratio 1000: 1 , 2000:1, 2500:1 (customized) Accuracy class 0.1%, 0.2% Primary current 0 - 5A AC and 0-100A AC Signal output 10mV/A, 1mV/A, 1mA/A Secondary voltage 0 - 0.05V AC, 0 - 0.1V AC, 0 - 1V AC; Secondary current 0-5mA or 0-100mA AC Max. Cont. Input current 130A.

Accuracy class 0.1 %, 0.2% Primary current 0 - 5A AC, 0 - 10A AC, 0 - 20A AC.

The P8 current clamp ct is an affordable & durable mini current clamp ct for measurements to 10A AC. This current clamp ct uses a special magnetic core to provide higher accuracy and lower phase shift. The P8 Series AC current clamp ct is a cheap and economic current clamp probe to be used in power and low level current measurement applications.

Operating Temperature -40°C to +55°C Dimensions 178*290*30MM Weight 1200G Ratio 1000: 1, 2000:5 or 3000:5 Dimensions 178 * 290 * 30MM Weight 1200G Holding wire diameter 120MM Max. jaw opening 120MM Jaw color Red & Grey Material PC+ABS, UL94 V0 Phase Shift 0.5° Accuracy 0.5% Range version 100A, .

Warranty 3 years Power Electronic Customized support OEM, ODM, OBM, Software reengineering Brand Name GFUVE Model Number S50 Primary current 0 - 500A AC and 0-1000A AC Signal output 1mV/A, 1mA/A Max. Cont. Input current 1200A Load capacity 20Ω, standard 4Ω Frequency range 10Hz-10MHz Dielectric strength 3KV 50Hz/60Hz at 1minute Temperature range -40°C to +55°C Output 2.

Warranty 3 years Power Electronic Customized support OEM, ODM, OBM, Software reengineering Place of Origin Beijing, China Brand Name GFUVE Model Number S50 Primary current 0 - 500A AC and 0-1000A AC Signal output 1mV/A, 1mA/A Max. Cont. Input current 1200A Load capacity 20Ω, standard 4Ω Frequency range 10Hz-10MHz Dielectric strength 3KV 50Hz/60Hz at 1minute Temperature range -40°C to +55°C Output 2.

Q8A2 permalloy core ac current clamp ct with high accuracy up to 0.1% is designed for use with energy meter tester, multimeter, recorder, power analyzer, safety tester etc.. It has low phase shift for power measurement, highly suitable for electric energy meter calibrator and oscilloscope. This Q8A2 clamp ct can convert 0 - 10A AC current into 0 - 10mA AC current with real shape, max 20A measurement, but with harmonic measurement function.

The P8 current clamp ct is an affordable & durable mini current clamp ct for measurements up to 10A AC. This current clamp ct uses a special magnetic core to provide higher accuracy and lower phase shift. The P8 Series AC Current Probe is a low cost and economical current probe for use in power and low level current measurement applications.

Operating Temperature -40°C to +55°C Dimensions 52.5*137.5*28MM Weight 400G Ratio 1000: 1 or 2000:1 Accuracy class 0.1%, 0.2% Primary current 0 - 10A AC and 0-200A AC Dimensions 52.5*137.5*28MM Weight 400G Holding wire diameter 18MM Max. jaw opening 18MM Jaw color Red, black Material PC+ABS, .

GF112D is a single-phase handheld electronic meter tester of 0.1 or 0.2 accuracy class, used for on-site fault testing of single-phase electricity meters. Wide measuring range from 1mA to 120A and 0 to 600V, and can also be used to test AC parameters - voltage, current, active power, reactive power, apparent power, harmonics, phase angle, power factor, frequency, energy etc.

Accuracy:0.05%, 0.1%. Stability: 0.01%/120s Voltage range:0-600V Current range:0-120A Frquency range: 40-70Hz Harmonic range: 2-51st or 2-63rd Phase angle range:0-360° The GF302D portable meter test equipment can test any kind of single/three-phase kWh meter of industries and mining enterprises as well as electric meter manufacturers.

Product description: GF312V2, a portable three-phase multifunction watt-hour meter calibrator. We consulted with users and studied similar products from around the world to create this innovative device. The product's measuring component uses high-speed A/D transmission to send DSP for digital processing, which greatly improves accuracy and stability.

Website/App Design & Development Solutions: Enhance your online presence and provide an exceptional user experience with our website and app design and development solutions. Improve your search engine rankings, ensure fast loading times, and optimize your digital presence for mobile devices. Our solutions include improved search engine rankings, faster website loading times, and mobile-responsive design.